Working on Panel

Working on the panel a bit. All holes/openings made and test fit of avionics. 

I Bought Wings

 So this will speed things considerably. On my way home from Oshkosh this year, a friend sent me a text at 2AM in the morning. He let me know that there was a set of RV-7 wings listed for sale on VansAirforce.com in Atlanta GA. This was extremely convenient because at that exact time (2AM) I was driving through Atlanta on my way home. Unfortunate though, I didn't see the text until I got home (Tampa, FL) the next morning. 

Anyway I immediately called and sent my deposit to hold the wings. Debbie and I went on a road trip the next weekend to pick them up. It was a great find!!

Here is a link to the online log showing the build process for the wings. 

http://www.mykitlog.com/dschoning

Fiberglass Canopy Bow

 I decided against the aluminum canopy bow. I decided that it might be better for aerodynamics to follow the original Van's design for this piece. 

Here are the strips that will form the bow. this will be bonded directly to the wind screen.

Someone decided to take my picture here. 

The canopy is used as a form to get the shape correct

After cure, the slider canopy is opened. this will be cut and sanded to final shape. 

Forward Canopy Fiberglass

 Morning all. Catching up on my posting as I have quite a back log of pictures to get through here. I have been working on the canopy. After installing the actual wind screen, I need to dress it in with a few layers of fiberglass and a "bondo-like" material to make it a happy aerodynamic shape. 

Starting with the Fiberglass Layup. Strips are cut to transition between the aluminum deck and the plexi. I did around 6 layers progressively getting smaller while building up. 

Then we use AwlFair which is a two part filler material which won't shrink. This will be applied and sanded many times to get the final smooth shape needed. Think airflow. 

Mounting Engine

OK, OK,OK, this isn't the actual engine. I have picked up an engine core (completely run out, not running engine) to use to continue the build process. Engine is an O-320-D3J from a Piper Archer. This is kind of an advantage is some ways. If I were to buy a new engine now, it would sit around until I finish the build. Airplane engines do not like to sit around. I can only imagine what is going on inside this run out engine. 

Anyway I can use this to continue building. Down the road I have the option to rebuild this engine or find a better one. To be determined. . .

Wheel Fairings

The gear and wheel fairings as said to increase the top speed by 12 MPH. The kit does contain a great shape to get started with. I start out with some trimming the gear leg fairings to remove excess material to make them fit properly. 

Next the wheel pants them selves.

Fitting to the wheels

Used laser levels to create a grid aligned to the center line which made the line up a snap. 

Mocking up the intersection fairings. 

Again using the laser level to line up the gear fairings. 

Accurate to 1/32 inch. I'm sure once they are put on and off a few times, they will become sloppy, But for now, they are correct. 

Canopy Bow

This is a modification from the original design which is supposed to increase the durability of the joint between the canoy and the wind screen. Instead of a fiberglass overlap, I will be using a .032 inch aluminium sheet cut the correct shape.